If your washing machine is not draining water, you may need to check the pump. Most pumps are located near the corner of the control panel. Some models have a small black panel that you can remove to access the pump. If you’re not sure how to locate it, look at the owner’s manual. It will often show a picture of the pump. You may also be able to see the clog through the clear plastic of the pump.
What causes washing machine not to drain and spin?
If your washing machine fails to drain and spin, you should check to see if the drain hose is blocked. This can be caused by a small piece of an object or debris that has become stuck in the outlet pipe. If the hose is clear, the machine should drain properly. If it is blocked, you may need to empty the washing machine before attempting to clean it.
Another cause of a spinning or draining washing machine is a defective motor control board. This is not always a visible component, so you may need to do a bit of tracing to find it. You can also check the motor control board for burnt or shorted components.
Another common problem is a faulty door lock or lid switch. When these fail, water cannot drain properly, which causes the washer to stop spinning. Fortunately, most of these problems are easy to fix.
4 Reasons Your Washing Machine Won’t Drain or Spin
Your washing machine may not drain or spin properly. This can result in a mess that’s worse than the clothes you started with. Fortunately, most washing machine problems are easily remedied. Here are some reasons why your washing machine might not spin properly.
One of the most likely causes of this problem is a clogged pump filter. Check this filter for clogging, and clean it regularly. It’s located in the bottom right corner of the machine. The pump filter is designed to catch foreign objects that may have gotten into the drain hose.
Another common cause of a clogged drain hose is sediment or debris. Older machines are particularly prone to clogging. If you’re unsure of what to look for, use a flashlight and a pair of needlenose pliers to remove anything stuck in the drain tube. Once the clog is removed, the water should begin to flow freely. If you can’t find the blockage, you should ask a service agent for assistance.
Troubleshoot top-load washer won’t drain or spin
If your top-load washer won’t drain or even spin, you may have a defective lid switch assembly. Check the lid switch assembly’s position and replace it if it is out of alignment. Another cause of the problem is a broken shifter, also known as an actuator. To replace it, follow the steps in this video. But be careful not to overextend the stem or extend the washer. This can damage the hose and prevent proper draining.
If the washer still won’t spin or drain, the drain pump could be clogged. A small piece of cloth may be clogging it. If the pump is blocked, you can unplug the power and water and check it for debris. If you can’t find any clog, pour water down the drain line to see if any is present.
If the problem persists, you may need to replace the drain pump. This is a common problem with top-load washers. If you don’t have a spare pump, look online for a replacement pump.
Check for clogs in the drain hose and drain pipe
If you have a washing machine that isn’t draining water, the first thing to do is to check for clogs in the drain pipe and hose. Clogs can cause a massive back-up, which can lead to flooding and leaks. A clogged drain can also indicate issues with the washing machine’s water inlet valves. These valves control the flow of both cold and hot water to the machine.
If the drain hose is clogged or has kinks, try unplugging the machine to access the drain pipe. Once you’ve accessed the drain pipe, pull out the drain hose. You can also use a needle-nose pliers to unscrew the pipe clamp.
If the water drains through the drain pipe, you can use a plunger to clear the drain hose. If you’re not able to find a clog in the drain pipe, you can try cleaning the drain with baking soda or vinegar and water. However, you must be careful not to mix these solutions, as you don’t want the water to boil! If the problem is deeper down the drain pipe, you can use a power auger to clear the clog. These tools are long enough to reach a clog farther down the pipe and are easy to work with.
Check the top-load washer drain pump
If your washing machine does not drain water, it could be the drain pump. You should first check the drain hose and the input port of the pump to see if there is any clogging or blockage. You should also make sure that there are no foreign objects in the water. If the pump still cannot drain water, you need to check the live voltage.
The hose may be clogged with soap or debris. If so, remove it. You can also check the pressure chamber and the recirculation pump to see if there are any blockages there. If you see blockages in any of these areas, you can clean it with a mixture of baking soda, water, and vinegar.
Another possible reason why your top-load washer does not drain water is the lid switch. This switch is located on the top of the washing machine. If the lid is not opening, the pump is not working properly. To check this, you can press a pencil against the lid switch.
Check the washing machine timer
If the water in your washer isn’t draining, you can check the timer for any issues. The timer is a mechanical component that controls all cycles in your washing machine. If it’s not working, you may need to replace a damaged part. To fix the problem, unplug the machine, and tilt the control panel back. Remove the screws holding the timer to the panel. Next, disconnect the timer from the washing machine’s wiring harness.
The timer is made up of an array of electrical contacts and a cam assembly that run the machine’s motor. It’s important to test this part for electrical continuity with a multi-meter. If the timer is the cause of the problem, you’ll need to replace the whole timer.
If the washing machine’s timer is sticking on the cycle, then there is a problem with the timer. The timer regulates the number of hours it takes to complete the wash cycle. If the timer is stuck on a cycle, then the machine can’t move on. You can try resetting the timer with a multimeter and a wiring diagram.
Test the washing machine lid switch
If your washing machine isn’t draining water, you may need to check the lid switch. The lid switch prevents the motor circuit from running while the lid is open. The switch may be damaged or the lid may not close completely. Once you find the problem, you can contact a repairman to replace the lid switch.
If the lid is not shut properly, it may be clogged or the lid switch may be defective. The lid switch should open and close properly when the washer is ready to spin. If you are unsure of the function of the lid switch, you can test it by running a regular cycle in your washing machine.
Another problem that may be preventing the washing machine from draining water is a damaged or clogged drain hose. You can easily replace the hose but be sure to make sure it matches the model of the machine. Other possible causes of not draining water include a broken pump or belt.
Cities we service in Dekalb County Community Service Area:
Brookhaven, Panthersville, Clarkston, Candler-McAfee, Decatur, Scottdale, Dunwoody, Tucker, North Druid Hills, Doraville, Druid Hills, Stone Mountain, Belvedere Park, Redan, North Decatur, Gresham Park, Chamblee